• 新式双梁起重机
新式双梁起重机 产品类别:双梁桥式起重机 产品描述:  H-起升高度Hoistingheight  V1-起升速度Hoistingspeed  V2-小车运行速度Travelingspeedoftrolley  V3-大车运行速度Travelingspe... 在线咨询
服务热线
024-67765646/13804073123
扫一扫加为好友
产品详情

 H-起升高度Hoistingheight

  V1-起升速度Hoistingspeed

  V2-小车运行速度Travelingspeedoftrolley

  V3-大车运行速度Travelingspeedofcrane

  L1-起重机左极限Leftlimitofcrane

  L2-起重机右极限Rightlimitofcrane

  C1-起重机两端最小极限Minimumlimitofbothends

  C2-起重机顶部最小极限Minimumlimitoftopofcrane

  S-起重机跨度Cranespan

  H1-起重机小车钩心到顶部的距离Distancebetweencoreofhookanditstop

  H2-起重机小车的高度Heightoftrolley

  H3-起重机底部到大车轨道面的距离Distancebetweenthebottomofcraneandcranerailplane

  H4-起重机缓冲器到大车轨道面的距离Distancebetweenbufferofcraneandcranerailplane

  H5-起重机顶部到大车轨道面的距离Distancebetweenthetopofcraneandcranerailplane

  W-起重机最外两个车轮之间的距离Distancebetweentwooutmostwheelsofcrane

  W1-起重机一角最外两个车轮之间的距离Distancebetweentwooutmostwheelsofonecornerofcrane

  W2-起重机台车两个车轮之间的距离Distancebetweentwowheelsoftrolley

  B-起重机最外车轮距离缓冲器端部之间的距离Distancefromtheoutmostwheeltoendsofbuffer

  b-起重机最端部距离大车轨道之间的距离Distancefromendstorailofcrane

  G-起重机整车的重量Overallweightofcrane

  K-起重机最大轮压Maximumwheelpressureofcrane

  P-起重机总的功率Totalpowerofcrane

  选型说明

  1、本产品系列表仅列出了常用的基本的规格起重机,工作级别为A5(FEM2m)时的标准跨度,没有副钩的室内用起重机。客户根据需要可以提出相应的要求。

  2、本系列也可以增加副起重机构,也可以增加轻载时速度加倍的设置,一般主副的设置为4:1,也可以根据客户的要求设定。囚设置副钩则起重机的总重及轮压会有所增加。

  3、表中的尺寸,重量,轮压供客户订货时参考,如果客户的需要条件发生变化,如工作级别,速度,起升高度有变化时,相应的参数,尺寸,重量,轮压等都会发生变化,实际的参数,质量,轮压以合同的要求为准。

  4、表中列出的起升速度,大小车速度为标准值,可以根据客户的需求做相应的调整。

  5、技术参数及尺寸会因为技术的改进或者升级有所变化,如有疑问的话可以和公司技术部联系。

  Instructionsforselectingtype

  1.Thisseriestablesofproductonlylistthegeneralcranewithbasicspecifications,includingthestandardspanatworkinglevelA5(FEM2m)andindoorcranewithoutauxiliaryhook.Customerscanmakerelevantrequirementsaccordingtotheirdemands.

  2.Thisseriescanaddtoauxiliaryhoistingmechanism,andalsothespeeddoublerifrunwithlightload.Ordinarily,thesettingofthemainandauxiliaryshouldbe4:1,whichalsobesetinaccordancewithrequirementsofcustomers.Itwillincreasethetotalweightandwheelpressureifaddingtoauxiliaryhook.

  3.Dimensions,weightandwheelpressureintablewillbereferencefororderingofcustomers.Ifrequirementsofcustomersgetchanged,suchassomechangesoccurredtoworkinglevel,speedandliftingheight,therelevantparameters,dimensions,weightandwheelpressurewillalsogetchanged.Theactualparameters,qualityandwheelpressureshouldsubjecttotherequirementsincontract.

  4.Liftingspeed,speedofcraneandtrolleytravelinglistedintablearestandardvalues,whichcanbecorrespondinglyregulatedaccordingtodemandsofusers.

  5.Technicalparametersanddimensionswouldbechangedaswithimprovementorupgradeoftechnology.Pleasecontactwithtechnologydepartm


相关产品
立即订购
产品名称:
联系人:
电话:
备注:
验证码:
辽宁华原重型起重机厂 CopyRight © 2017 辽宁华原重型起重机厂 All Rights Reserved
全国咨询电话: 13804073123 地址:辽宁省开原市铁西北街83号
网址: www.hyzxqz.com
二维码
全国分站: 辽宁 沈阳 大连 鞍山 抚顺 本溪 丹东 锦州 营口 阜新 辽阳 盘锦 铁岭 朝阳 葫芦岛